CalAmp GUARDIAN Manuel d'utilisateur télécharger pdf (Page 50)

Figure 28 Read and Write buttons in the User Configuration Window

The Read Guardian button will read the configuration parameters from the current Guardian setup and store the

information in local memory. The parameters can be viewed and/or edited with the User and Link Configuration

windows.

The Write Guardian button will write the configuration parameters from the current User Configuration window to the

Guardian Modem and store the information in non-volatile memory. The Guardian will immediately begin using the

new configuration.

The Read File and Write File buttons are used to read or write a User Configuration to or from a file on a PC. This can

be useful for saving different Guardian configurations so they can be easily written into multiple Guardian Modems.

Note: CalAmp recommends a Read be done anytime an initial connection is made to the Guardian Setup Port before

accessing the Link Configuration window. This will help avoid writing erroneous parameters to the connected unit. A

“Read Guardian” is automatically performed when the User Configuration window is opened with a Guardian Modem

connected.

5.13 DIAGNOSTIC IDS, ALARMS AND FILTERS

The Diagnostic IDs, Alarms and Filters window is accessed from the Utilities menu.

The Diagnostics IDs and Alarms window allows the user to set up the ID List for use with the Offline Link Test and

Offline and Online Diagnostics as well as the Alarms for use with Online Diagnostics.

Guardian™ Serial Modem or Analog Radio for Licensed Spectrum PN 001-5006-000 Rev. 3 | Page 42

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 99 100

Pas de commentaire

CalAmp GUARDIAN Manuel d'utilisateur Page 50