CalAmp GUARDIAN Manuel d'utilisateur télécharger pdf (Page 75)

Important: When all parameters are selected and verified to be correct, click Save Changes at the bottom of the Link

Configuration window to save the changes. The Link Configuration window will close.

The User Port pin-out configuration can be displayed by clicking the User Port Configuration in the User Configuration

window.

Figure 45 User Port Configuration window

In Loader mode, the user port controls the analog radio functions. Pin 4 can be programmed to provide a Carrier Detect

(CD) output 0-5 VDC or 5-0 VDC. Pin 4 can also be programmed to output the receiver RSSI level as DC voltage allowing

it to be used for system monitoring and control.

The following table shows user interface pin functions in reference to the DL-3400 wiring and cable color code.

Pin 4 is

selectable for

CD or RSSI

output mode.

Guardian™ Serial Modem or Analog Radio for Licensed Spectrum PN 001-5006-000 Rev. 3 | Page 67

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 99 100

Pas de commentaire

CalAmp GUARDIAN Manuel d'utilisateur Page 75